Oxygen Scavenger OxyGuard S
Part No: RXSOL-34-6119-250
Generic Name: Used as Oxygen Scavanger for Drilling Rigs
Also known as: Oxygen Scavenger Sodium Sulphite, OXYGEN SCAVENGER SCAV TREAT
Oxygen scavenger for feedwater treatment to help control corrosion caused by dissolved oxygen.
Product Description
This is most common oxygen treatment as a scavengers used to effectively remove dissolved OXYGEN from your feedwater. By the presence of dissolved oxygen in system, corrosion and pitting caused on metal surface. Removes dissolved oxygen, By acting as an oxygen scavenger.
A fast-acting, catalyzed sodium sulphite (Na₂SO₃) oxygen scavenger for low- and medium-pressure boiler systems. The product reacts stoichiometrically with dissolved oxygen to prevent corrosion in boilers, feed lines, and condensate systems by converting oxygen to inert sulfate.
Technical Specifications
| Property | Specification |
|---|---|
| Appearance | Clear to pale straw liquid |
| Specific gravity @ 25 °C | ~1.30 – 1.34 (depends on strength) |
| pH (neat) | 8.5 – 10.5 (stabilized alkaline) |
| Odor | Faint sulfurous |
| Freeze point | < 0 °C (varies with strength) |
| Solubility | Completely miscible with water |
Product documents & quotation
Request the current SDS and TDS for Oxygen Scavenger OxyGuard S (RXSOL-34-6119-250). Include your quantity, application, delivery location and required date. Availability, pack sizes and lead times are confirmed with your quotation.
Request SDS, TDS & quoteSupplier: RXSOL, Dubai, UAE. Brand: RXSOL.
Dosage & Application
Reaction (overall):
Na₂SO₃ + ½ O₂ → Na₂SO₄
Catalyst accelerates the reaction at lower temperatures and shorter residence times (e.g., in deaerator outlets and feedwater lines)
- Deaerator outlet O₂: ≤ 7–10 ppb (if DA present)
- Sulfite residual in boiler water:
- Normal operation: 20–40 mg/L as Na₂SO₃
- High risk / wet lay-up: 60–100 mg/L as Na₂SO₃
- pH (feedwater/boiler): follow your internal treatment program (commonly FW pH 8.5–9.2; boiler water pH 10.5–11.5 depending on pressure).
- Preferably deaerator storage section or feedwater line upstream of economizer to ensure complete O₂ removal before the boiler.
Example Dose Calculation
Feedwater DO = 0.10 mg/L (100 ppb) at 20 m³/h.
Stoichiometric Na₂SO₃ = 0.10 × 7.88 = 0.788 mg/L.
With 1.3× safety factor → ~1.0 mg/L Na₂SO₃.
At 20 m³/h → 20 g/h Na₂SO₃ (as pure).
Using 38% liquid: 20 / 0.38 ≈ 52.6 g/h (~40 mL/h) (SG 1.32 ⇒ ~30 mL/h by mass; verify on site).
Fine-tune to maintain target sulfite residual in boiler.
Available Pack Sizes
SCAVENGER OXYGEN, OXYGEN SCAVENGER, WATER-BASED DISSOLVED OXYGEN SCAVENGER LIQUID, WATER SOLUBLE SCAVENGER available in 250 Kg Liquid Drum.
Notes
- Rapid kinetics with catalyst—effective even at moderate temperatures.
- Reliable corrosion protection of pre-boiler & boiler circuits.
- Cost-effective vs. volatile scavengers for LP/MP systems.
- Easy control by simple sulfite residual testing.
- Compatible with most phosphate/polymer internal treatments.
Applications
- Oxygen removal in low/medium-pressure boilers (typically up to ~65 bar; usage above this pressure is uncommon due to potential sulfate/solids carryover).
- Hot standby protection to prevent pitting during idle periods i.e. Oilfield Application.
- Feedwater & deaerator outlets where residual O₂ must be suppressed rapidly.
Additional Details
| Industrial Area | Oxygen Scavenger – Sodium SulphiteProduct Description: Oxygen Scavenger – Sodium Sulphite is a highly effective oxygen scavenging chemical formulated to remove dissolved oxygen from boiler feed water, injection water, and industrial water systems. It rapidly reacts with dissolved oxygen, preventing corrosion in pipelines, boilers, heat exchangers, storage tanks, and water injection systems. The product is widely used in the oil & gas, power generation, petrochemical, refinery, and water treatment industries to maintain low dissolved oxygen levels and protect critical equipment from oxygen-induced corrosion. Key Features
Applications
Typical Specification
Performance Requirement
Oxygen Scavenger Sodium Sulphite, Sodium Sulphite Oxygen Scavenger, Boiler Water Oxygen Scavenger, Injection Water Treatment Chemical, Dissolved Oxygen Remover, Boiler Water Treatment Chemicals, Corrosion Prevention Chemical, Industrial Water Treatment Chemicals, Sodium Sulphite Supplier, Oxygen Scavenger for Water Injection. |
Related Products
Corrosion Inhibitors for Oil and Gas
Acid Shield Metal Guard Acid Corrosion Inhibitor
Part No: RXSOL-34-1503-210
Also known as: Rodine 213, Acid Corrosion Inhibitor, RODINE 141, RODINE 145
Acid corrosion inhibitor for iron and steel during hydrochloric-acid cleaning and descaling. Request the current TDS for material compatibility and operating limits.
View DetailsCorrosion Inhibitors for Oil and Gas
Corrosion Inhibitor 8050
Part No: RXSOL-34-8204-210
Also known as: PROSOLV CI8050 210 Ltr
Film-forming corrosion inhibitor for oil and gas pipeline service. Request the current specification and a treatment programme matched to the pipeline conditions.
View DetailsCorrosion Inhibitors for Oil and Gas
Corrosion Inhibitor for Oil and Gas Processing
Part No: RXSOL-34-1047-210
Also known as: CORRTREAT 735W, NALCO 1007 A, Precor Corrosion Inhibitor Water based
Corrosion inhibitor for oil and gas processing applications. Confirm compatibility with the process fluid, metallurgy and operating conditions before selection.
View DetailsFrequently Asked Questions
How do I order Oxygen Scavenger OxyGuard S?
Quote the product name and part number RXSOL-34-6119-250, quantity, delivery address and required date. RXSOL will confirm availability, packaging, price and delivery terms before you order.
How can I request the SDS and TDS for Oxygen Scavenger OxyGuard S?
Use the document request below and include the product name and part number. Ask for the current supplier Safety Data Sheet (SDS), Technical Data Sheet (TDS) and any batch Certificate of Analysis (CoA) required by your procurement team.
How do I confirm suitability for my application?
Check the current product specification against your application, equipment materials and operating conditions. Product grades and formulations differ; use the supplier documentation for the exact product rather than a general category recommendation.